Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Rev.Norb on August 03, 2005, 10:11:58 pm

Title: Rush N' Attack
Post by: Rev.Norb on August 03, 2005, 10:11:58 pm

Hello All,

I recently purchased a used Rush N' Attack cabinet. The previous owner sold it pretty cheap because the video became squashed into a single horizontal line on the monitor. I removed the back panels and this is what I discovered.

(http://www.dotnet.com/~small/images/brokenmonitor1.jpg)

(http://www.dotnet.com/~small/images/brokenmonitorback3.jpg)

I have zero knowledge of arcade monitors. I assume that this back board should not be hanging off the back of the monitor like that. Is this replaceable or is this monitor FUBAR??

Thanks for your time,

Seth

Title: Re: Rush N' Attack
Post by: Apollo on August 03, 2005, 10:39:02 pm

Throw it in a dumpster dude, she's done. And by the way the person who sold it to you lied to you, there was no single line, there was just a black screen with nothing on it.

Title: Re: Rush N' Attack
Post by: SirPeale on August 03, 2005, 11:32:13 pm

He's right.  But before you toss the whole thing, save the chassis, and toss it on eBay.  You can use the proceeds to fund the purchase of a new monitor.

Or, if you're brave, you could get a new tube and do a tube swap.

Title: Re: Rush N' Attack
Post by: Ken Layton on August 04, 2005, 02:11:04 am

Ebay the chassis and the yoke. Make note of the monitor make and model if selling the parts.

Title: Re: Rush N' Attack
Post by: flyguy1821 on August 06, 2005, 11:43:05 pm

Give that seller the "Hogan Leg Drop"!!!!