The NEW Build Your Own Arcade Controls

Main => Project Announcements => Topic started by: rchadd on July 31, 2005, 05:35:03 pm

Title: Crackington Gorf Restoration Project
Post by: rchadd on July 31, 2005, 05:35:03 pm

not a lot to do to this one :)

its in good condition exception for the boardset not working :(

and the laminate at the bottom is chipped and has big hasp bolted to the front

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on July 31, 2005, 05:36:27 pm

.

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on July 31, 2005, 05:38:42 pm

.

Title: Re: Crackington Gorf Restoration Project
Post by: zorg on August 01, 2005, 08:36:14 am

nice acquisition.

can you scan some pieces, the side art and the bezel will be nice to have and trace.

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on September 02, 2005, 04:08:06 pm

the boardset is now working 100% except for an issue with the PSU :(

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on November 07, 2005, 06:05:24 pm

decided to remove the hasp and relaminate

first needed to remove the coin door and fill in the damage

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on November 07, 2005, 06:07:03 pm

more filler

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on November 07, 2005, 06:09:49 pm

glued down new grey laminate (not a bad color match to the original really) to side and front with impact adhesive. the laminate was quite difficult to cut with stanley knife!

still need to trim the edges and cut out the holes for the coin door with flush router bit

will need to wash down the laminate as pretty dust in this picture

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on November 21, 2005, 07:37:38 pm

routed the sides and holes

fitted the coindoors

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on November 21, 2005, 07:40:15 pm

new bulbs in the joystick

fixed problem regards reset line from psu to the boardset

looking good? especially next to frogger;)

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on November 21, 2005, 07:41:46 pm

oops a cooked sound amp :(

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on October 16, 2010, 03:16:27 pm

looks like k4600 monitor is now faulty. will try to fix with a cap kit.

Title: Re: Crackington Gorf Restoration Project
Post by: rchadd on October 16, 2010, 03:19:05 pm

the game is playing but the image is really faint and colors are off.

tested with another monitor and everything look ok

Title: Re: Crackington Gorf Restoration Project
Post by: IG-88 on September 01, 2014, 09:36:53 pm

Sorry to drag up an old thread, but I was wondering how this came out. Just got a Gorf myself last week.