Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: MonitorGuru on July 11, 2005, 08:59:06 pm

Title: Sanyo 14" - Blows 300ma fuse, burned hole in PCB, tube blown?
Post by: MonitorGuru on July 11, 2005, 08:59:06 pm

,

Title: Re: Sanyo 14" - Blows 300ma fuse, burned hole in PCB, tube blown?
Post by: dabone on July 11, 2005, 10:39:38 pm

That tube looks vented..



Later,
dabone

Title: Re: Sanyo 14" - Blows 300ma fuse, burned hole in PCB, tube blown?
Post by: Ken Layton on July 12, 2005, 01:04:54 am

Yeh that tube looks like it's shot. Must have a crack or something that let the vacuum out.

That cap may be shorted or it had bad solder joints which caused the arcing/burning. Possibly you may also have a bad flyback (which is available as a reproduction part at arcadeshop.com).