Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: conseit68 on July 07, 2005, 08:24:59 am
-
Ok this is what pixelhugger and gozur was referring to in the other thread. I am selling off the below logo...any single color with sizes from 5" x 5" up to 21" x 21"...these are going to be made on an as ordered basis so give me 5-7 days per order. Pricing is $1.00 per inch as explained below. All prices are based on size, quantity, and the time it takes for me to remove the unused vinyl. Custom sizing and colors such as chrome, gold, reflective, and UV reactive are availible for additional charges. Shipping is included to anywhere in the United States, PM me if your outside of the country for shipping fees. Special thanks to pixelhugger again for the use of his art
-
You want PMs or in thread orders?
-
I would prefer thread order unless there is a question then just pm or email me. thanks ninja...I knew I would forget something :)
***All questions concerning costs please make via PM...thanks
-
Cost for 4 10"x10" in yellow?
Ooops, PM sent. :-X
-
I just want to bump this for Conseit68. He made some custom NAOMI stickers for me and did an amazing job. The atomic BYOAC logo will look nothing short of spectacular.
Thanks for doing this for the community.
-Goz
-
I've been searching for some sideart for some time now....BY GOLLY I THINK I'VE FOUND IT!
-
thanks for the kind words goz :)
lpz just pm me with what you need :)
-
What's the smallest you can get it and still have it be legible? I'd consider putting one on my truck, but I was thinking of something around 3".
-
4" would be the smallest I could go due to the wording around the outer band, but that will be close :)
just let me know...
-
FYI the BYOAC logo Hotwhls made for me is 4 1/2 inches from outer ring........
I wouldn't recomend going any smaller that that..........
hope this pic helps to see the size......
close up in this thread (http://forum.arcadecontrols.com/index.php/topic,39490.0.html)
-
yep i agree...4" would be difficult thanks for the input missioncontrol :)
-
yep i agree...4" would be difficult thanks for the input missioncontrol :)
NP
might want to ask a mod if this can be stickied for a week or so to generate interest
-
looks great......
7" for me would do fine
-
I would like two (2) 7" in white.
-
Here's an updated PDF of the button label stickers. I haven't even started cutting these yet (I've got about 30 SASE's, so this is going to take a while to cut), so let me know if this needs any changes before I go ahead with it.
Edit: PDF file removed. Take a look at the JPG in the first post of this thread.
This file is based on Nannuu's original stickers (thanks Nannuu!). I just added the button labels at the top.
-
I just cut a couple of sets of these and even at the slowest setting (takes about 10 minutes to cut one set) the t-stik dust washer graphics is too small to be weeded properly (those 'way' letters are 1/20 of an inch tall). I'll need to revise the graphics before I proceed with cutting everybodys, sorry.
Also, the 'made in the USA' part of the Taito logo is too small, I'll have to remove it.
-
are the partially clear? ??? i think using one as sideart would be awesome on frankenmame lol
-
anything white would be empty space...so yes I am sure they would look nice as sideart. :)
-
I got my atomic logos the other day and they are great. Thank you VERY much conseit68.
Also, I rec'd a set of buttons stickers (from JoyMonkey) but you can get them from Conseit68 now.
I was a little concerned with the difficulty of the button sticker application. I tried it out last night and it worked GREAT. these things are very cool. Thank you.
-
conseit68,
PM sent.
-
Got my custom stickers today thanks they look great..... way better than I hoped
;D
-
Does anyone still have these stickers? :'( :-*
I sure would love to get a set! Thanks!!
-
Heres a pic of my test run. They worked out better than I expected. I hope when I use them for real to get even better results.
-
pm sent for button stickers =)
-
how much are button stickerS?
-
would it be possible to ask for a suggestion on hte stickers? If so my suggestion is a computer mouse icon so one can insicate which buttons are mouse buttons.
-
;)
here I thought I had a new scrabble word:
-
How well do the buttons stickers sit on buttons? They look good but I am worried they will just peel off with grubby fingers banging on them the whole time.....
-
How well do the buttons stickers sit on buttons? They look good but I am worried they will just peel off with grubby fingers banging on them the whole time.....
Most of the buttons wouldn't be banged on constantly though. They are all start, coin, pause, etc.... buttons that get one press every now and again.
You could also throw on a layer of clearcoat on the button if you want a bit more security.
-
Do you buy the button stickers in that whole set or on there own?
Also - how much are they?
Thanks
-
Many thanks to timoe for sending the stickers.
-
any ability to get a set of these button stickers printed still? I would really love to get my hands on some!
-
conseit68 was suppost to send me some about 2 months ago, but i havent heard anything from him. Id really like to put the finishing touches on my CP. heh
-
Same story here. Maybe someday they will arrive. ;D
-
I saw similar stickers on Kneival's "woody" project, and they excited me sexually. This was the closest thing to a result I found through searching the boards. Is anyone doing anything like this anymore? If not, any suggestions on somewhere else to go to get them?
-
http://forum.arcadecontrols.com/index.php?topic=49291.0
MikeDeuce is the man to talk to, at least about the button stickers. No clue on the BYOAC ones. He also does sheets like the one conseit shows in his July 7th post, which is what I think you're talking about.