Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: tba on June 23, 2005, 02:56:37 pm

Title: Monitor tube swap.
Post by: tba on June 23, 2005, 02:56:37 pm

i cant find much info on this area, but i was wondering if this can be done and if there are any web pages out there that might give me more info...

i have a Sharp XM-2001N in a Dr. Mario cab with SEVERE screen burn in which is listed as a 20" monitor... and i also have a 20" TV that the electronics don't work right in (almost new/ barely used, but it has a tendency to turn it self on at 3 am at full volume on a channel with static... so it is not much good).

so is this possible? i have some college electronics courses and am a telecommunication equipment tech... so i know my way around high voltages...

Title: Re: Monitor tube swap.
Post by: Ken Layton on June 23, 2005, 07:17:56 pm

Try these:

http://coinop.org/repair/Monitor_Tubeswap.aspx

www.rcilink.com/arcade/TubeSwap.htm

http://chux0r.org/20EZ.php

Title: Re: Monitor tube swap.
Post by: bjk7382 on June 24, 2005, 12:33:26 am

Yet another

http://www.ionpool.net/arcade/tubeswap/tubeswap.html