Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: eggedd2k on June 20, 2005, 04:43:23 pm

Title: Question about dip switches on credit board...
Post by: eggedd2k on June 20, 2005, 04:43:23 pm

my cab's got a coin controls credit unit in it.  i'm trying to figure out what the dip switch position means in relation to how much it is a go etc..

there are two sets of dip switches - the first set has got 10 switches, the other has 8.

the switches are as follows:-

set 1:

1 - OFF
2 - ON
3 - OFF
4 - ON
5 - ON
6 - ON
7 - OFF
8 - ON
9 - OFF
10 - ON

set 2:

1 - OFF
2 - OFF
3 - ON
4 - ON
5 - ON
6 - ON
7 - ON
8 - ON

THERE ARE 5 WIRES COMING OUT OF THE CREDIT BOARD AND DISSAPPEAR INSIDE THE CABINET

Title: Re: Question about dip switches on credit board...
Post by: RayB on June 20, 2005, 04:47:35 pm

 ???
Does Coin Controls have a website? I would google for this info. It's not very common knowledge.

Title: Re: Question about dip switches on credit board...
Post by: eggedd2k on June 20, 2005, 05:12:07 pm

i've just found some info on the swallow amusements site which has confirmed the dip switch settings (http://www.coin.demon.co.uk/credit.htm if anyone's interested

Title: Re: Question about dip switches on credit board...
Post by: Franco on June 20, 2005, 05:15:43 pm

It may be a bit late but if its a Sentail coin mech with the coin controls door, this page may help:-

http://homepage.ntlworld.com/chris.nightingale1/arcades/cbmain.htm

Title: Re: Question about dip switches on credit board...
Post by: eggedd2k on June 20, 2005, 05:36:29 pm

no that's great - i'd just found that site