Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Jpod1977 on June 20, 2005, 10:19:07 am

Title: Display Problems
Post by: Jpod1977 on June 20, 2005, 10:19:07 am

I have an 8liner board that is displaying in only red color. what caused this was the CMOS battery leaked acid on to the board had to repair some lifted traces and shorted out some resistors repaired the traces and resistors got the board powered up the game plays now but all red. if any one could point me in the direction to find out what is causing this or to find a schematic for this board, or tell me where the video driver IC(s) are it would me helpfull

Title: Re: Display Problems
Post by: Ken Layton on June 20, 2005, 11:17:19 am

Contact www.8liners.com and they should have schematics/service information on just about any 8liners board.

Title: Re: Display Problems
Post by: Jpod1977 on June 20, 2005, 11:38:10 am

thank ken i be placing an order for some ebay items im about to win so i will ask about then, but i have seen any thing on his web site about schematics