Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: alundra on June 18, 2005, 12:37:27 pm
-
i just installed a neo geo harness in my cab, everything went good, except for the sound..in neo speaker, i know there is three wires require for neo geo speaker, one is Right speakr and Left speaker and the other one is ground..i pluged and switches all the wires but i still get no sound..what am i missing? my cab has only one speaker btw...thanks
-
i got the sound to work now..but it only have sound when i play the game..if i let the game play by itself, it doesnt have any sound..this happen the samething before i converted my cab to neo geo cab..anyone have this problem?
-
check your settings and have the ATTRACT/DEMO sounds to ON if you want sounds during attract/demo mode.
-
There's a button in my dedicated 4 slot cab that I press labeled hardware test. Then it goes to the hardware test mode with access to all the motherboard settings. Go to the setup soft dip section and there is listed the carts currently in the machine plus one more category called machine setup, select that option. Then there is an option for demo sound to be off or set by cartridge, set it to set by cartridge. Make sure afterwords your cartridges all have their individual demo sound set to on, in the soft dip menu. It's pretty easy stuff.... but then again I have a big red button to clearly push to get to my test mode. Hope this helps, and sorry if my wording isn't exact. I'm not at work to test my cab. If you still have trouble on Monday I'll get you the exact text to navigate by.
-baker