Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: xonix_digital on June 14, 2005, 10:06:46 pm

Title: Quick question about Coin mechs...
Post by: xonix_digital on June 14, 2005, 10:06:46 pm: Hi,

I was wondering about the difference between token and quarter mechs. And what the measurement significance is between the different tokens.
Can they be adjusted to take either or?

Thanks,

- XD
Title: Re: Quick question about Coin mechs...
Post by: Thenasty on June 14, 2005, 10:10:02 pm: sounds like you need the "Ultimate All in One Coin Mech" ?
Check my site on how to make one that accepts any size tokens/coins.
Title: Re: Quick question about Coin mechs...
Post by: xonix_digital on June 15, 2005, 03:39:19 pm: Well I was hoping for one that would fit my Midway Galaxian Coin door. Where would I buy one of those all-In-Ones?

- XD
Title: Re: Quick question about Coin mechs...
Post by: Stingray on June 15, 2005, 04:15:44 pm: http://forum.arcadecontrols.com/index.php?board=2%3baction=display%3bthreadid=19200

-S
Title: Re: Quick question about Coin mechs...
Post by: xonix_digital on June 16, 2005, 05:11:16 pm: Will a midway door fit all coin mechs or is there something else I need to know?

- XD
Title: Re: Quick question about Coin mechs...
Post by: Thenasty on June 16, 2005, 05:42:24 pm: you should post a pic of a COIN MECH that you wnat to use, cause there are different COIN MECHS out there so your answer is "NO" Midway Coin door fits mostly the mechanical/fixed type coin mechs and I'm sure others but your question states "ALL" which is imposible to answer, and that answer could be "YES or NO".
Title: Re: Quick question about Coin mechs...
Post by: Stingray on June 17, 2005, 11:48:28 am: The short answer is yes, most mechanical coin mechs fit Midway doors. See the above post for the long answer. :)

-S