Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: eggedd2k on June 10, 2005, 04:20:43 pm

Title: Have got a coin door, but what type of mech does it need?
Post by: eggedd2k on June 10, 2005, 04:20:43 pm

i've picked up a coin door the same as this one http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=575&item=6185261263&rd=1&ssPageName=WDVW

it's not got a coin mech.

Title: Re: Have got a coin door, but what type of mech does it need?
Post by: eggedd2k on June 10, 2005, 04:28:13 pm

by the way i want one that's got a microswitch to register credits

Title: Re: Have got a coin door, but what type of mech does it need?
Post by: Ken Layton on June 10, 2005, 06:55:39 pm

Hard to tell you what to get since the only pictures are of the front of the door. All coin doors look alike from the front. We need to see the back of the door.

Title: Re: Have got a coin door, but what type of mech does it need?
Post by: eggedd2k on June 11, 2005, 07:04:43 am

i'll try and get a photo of it. the guy i got it off said it's a Mars coin door.  it's got two green/orange clip things on the back also if that's any use

Title: Re: Have got a coin door, but what type of mech does it need?
Post by: Ken Layton on June 11, 2005, 11:00:49 am

If it's a Mars Electronics door then chances are it is special. I suggest contacting the manufacturer's technical support at www.meiglobal.com