Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: fox donovan on June 05, 2005, 01:24:02 pm
-
O.k guys i'm having some problem with my hantarex us250 psu, It keeps blowing the f1 fuse, I opened up the unit and found this little carbon disk that seems to have blown i was told to remove it that i did then the fuses stoed blowing but then there was no power so resoldered it back and bang goes another fuse if theres anyone who knows about these psu's i would be very happy.
I can post pic's if it helps.
I'm in the uk.
Thanks guys
-
I'll be happy to email you the schematics if you want, but it may be best just to get a PC power supply.
The outputs are:
+5 10A
-5 1A
+12 2A
-12 0.5A
Best,
- Mike -