Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: tivogre on June 04, 2005, 01:04:52 am

Title: Source for CLEAR levers behind the reject button on coin door?
Post by: tivogre on June 04, 2005, 01:04:52 am

Hello!

I recently replaced the stock yellow reject buttons on my coin door with the appropriately colored buttons for the players 1-4.

However, behind each reject button, there is a spring loaded, translucent RED plastic lever that the bulbs shine through.  This blocks a bit of the light AND tints all of my buttons slightly red.

Is there a source for CLEAR replacements for these parts?

Title: Re: Source for CLEAR levers behind the reject button on coin door...
Post by: CJK on June 04, 2005, 06:36:06 am

If you don't mind my asking, where did you get the replacement buttons? I would like to do the same thing for my coin door.

Thanks!
-- Chris

Title: Re: Source for CLEAR levers behind the reject button on coin door...
Post by: tivogre on June 04, 2005, 07:26:19 am

Quote from: CJK on June 04, 2005, 06:36:06 am

If you don't mind my asking, where did you get the replacement buttons? I would like to do the same thing for my coin door.

Thanks!
-- Chris

No problem.

The reject buttons are from HAPPs here:

http://www.happcontrols.com/cc/420517xx.htm

And the Inserts:

http://www.happcontrols.com/cc/42008400.htm

Here is the result:

(http://www.ogredog.com/images/MAME%20Construction/Coin%20Door%20-%20Colored%20Tabs.jpg)

The only thing that will make it better is to get the clear levers, and then maybe some superbright LEDs...

Title: Re: Source for CLEAR levers behind the reject button on coin door?
Post by: CJK on June 04, 2005, 01:44:58 pm

That looks MUCH better than all one color! (I can hear my wife groaning now, as I find yet ANOTHER thing to spend money on for this cabinet!)

Thanks for the info!
-- Chris

Title: Re: Source for CLEAR levers behind the reject button on coin door?
Post by: tivogre on June 05, 2005, 01:59:46 pm

OK... If no one has a SOURCE for these, does anyone know what they're CALLED (proper name) so I can begin looking for them?

Title: Re: Source for CLEAR levers behind the reject button on coin door?
Post by: Silverwind on July 22, 2005, 05:17:29 pm

Will these reject buttons fit a coin controls door?