Build Your Own Arcade Controls Forum
Main => Monitor/Video Forum => Topic started by: thebestofsteve2 on May 31, 2005, 10:43:59 pm
-
Hi, I powered up a fairly new samsung monitor.
At first I got no picture, then I noticed there was am little damage on the neck.
I resoldered a few of those brass wires into place and now I am getting a thin green line running through the center of the monitor with no picture.
I didnt notice any other disconnections or broken pieces on the neck.
Any help would be appreciated. Thanks! Steve
-
Repeat after me----Samsung does not make commercial arcade monitors----Samsung does not make commercial arcade monitors.
-
Repeat after me----Samsung does not make commercial arcade monitors----Samsung does not make commercial arcade monitors.
Where did he say it was an arcade monitor? Samsung make tons of tv's and maybe he decassed one of those. Stop being a idiot and maybe try to help the guy.
@thebestofsteve2
sorry, i dont know much about monitors but have you got the right amount of power running to it? some monitors have really weird power requirments and maybe thats the cause of the problem
EDIT: someone else had a silimar problem, check out the link and see if it helps you
http://forum.arcadecontrols.com/index.php/topic,35064.msg305618.html#msg305618