Build Your Own Arcade Controls Forum
Main => Artwork => Topic started by: midway on May 24, 2005, 03:46:52 pm
-
hi guys,
i've gotta lethal enforcers cab in my garage,
it's in good condition
i could photo the front n' sides with a really good camera
i've got pro lights so they should look good
i can scan the marquee,bezel and cpo,
theres nice art inside the cab too ... a figure in the cross hairs on both sides..
i'll do it if anyone's interested..
i'd love a copy of a moon patrol cpo if anyone has one as i'm kickin
together an over sized home brew moon patrol cabinet out of an old Silverline 25 jamma cab.... and i'd like to do a p-shop job on it
I see some familiar names from the mameworld boards ..howy yiz!
and .....this site is the dawgs!!
-
go ahead and get all that artwork if it isn't already at the library, and upload it. we can use all the artwork we can get our hands on. someone will come along and vectorize it eventualy.
i'm unsure about the cpo, but i'm sure someone will be in touch with you.
-
thanks flinkly!
-
where is the library? I have an Arkanoid and Revenge of Doh I could scan if needed...
-
Please do submit as much as you can...Here's the Library:
http://localarcade.com/arcade_art/
-
anyone got any tricks for scanning marquees... or is it completely straightforward?
-
1. 300 dpi or higher
2. use the least amount of compression if you use jpeg
3. if you have to scan it in two parts(which is mostly likely the case), then either stitch it yourself or upload both parts as a *.zip to the library and someone will fix it.