Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: wfg97079 on May 17, 2005, 11:21:37 am

Title: ms pacman monitor problem
Post by: wfg97079 on May 17, 2005, 11:21:37 am

Heres what my video looks like
http://www.miltonsoffice.com/pac2.wmv
or
http://www.miltonsoffice.com/pac.avi

if I use the same board, same power supply and same monitor (a wg
k7300) with a different harness it looks perfect
Any ideas?

Title: Re: ms pacman monitor problem
Post by: cw on May 17, 2005, 06:51:00 pm

is it just me or are the links dead???

Title: Re: ms pacman monitor problem
Post by: Karetaker on May 17, 2005, 06:57:54 pm

I couldn't get anything either..... maybe it's just us.

Title: Re: ms pacman monitor problem
Post by: wfg97079 on May 17, 2005, 07:09:46 pm

weird, I can get to them from home and work
maybe right click them and save target as?
they are both the same video, just some people had trouble viewing the avi, must be a codec thinig

Title: Re: ms pacman monitor problem
Post by: Thenasty on May 17, 2005, 08:09:50 pm

no problem here, but for your problem have no idea but it looks like maybe a loose video wire or something.
Also try this site.

http://www.mikesarcade.com/arcade/pacfix.html


I just re-read your post and seems like you already know whats up.

Maybe the harness that don't work is not the right one. Was Ms.Pacman a JAMMA board ? Looking at my Ms.Pac manual, it does not look like JAMMA. Maybe the harness that don't work is for JAMMA (just a guess). Come to think about it, if it was a JAMMA harness, you won't be able to shove it in :)
So its down to maybe some loose wires or cold solder etc....

Title: Re: ms pacman monitor problem
Post by: Peter Baluk on May 18, 2005, 03:05:41 am

LOOKS LIKE A MONITOR PROBLEM.
What monitir is in you game?
look into the horizontal circuit.
Peter