Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Wyluli on May 14, 2005, 04:01:51 pm

Title: HELP needed with pre-stripped and labelled VGA breakout cable from Ultimarc
Post by: Wyluli on May 14, 2005, 04:01:51 pm

I purchased the pre-stripped and labelled VGA breakout cable from ultimarc to hook up my computer (with arcade VGA card) to my cabinet (which has a 25" Hantarax arcade monitor).
To make a long story short, I found out from Ultimarc that the cable may be mis-labled. 
Does anyone here have one of these cables and if so, can you please give me the pin-out by color? 
R, G, B = colours
H Sync =
V Sync =
Ground =

(Hopefully this will work, example: R = black wire, B = red wire, G = purple wire, and so forth.)

Thank You.

Title: Re: HELP needed with pre-stripped and labelled VGA breakout cable from Ultimarc
Post by: Thenasty on May 15, 2005, 10:47:51 am

if you a multimeter you can easisly check which is which.

pins:

1 = Red
2 = Green
3 = Blue
5,6,7,8,10 = GROUND
13 = H/Sync
14 = V/Sync

to make composite twist 13/14.