Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: teetu on May 01, 2005, 03:10:26 am

Title: Quick question for Pac Man Upright Owners
Post by: teetu on May 01, 2005, 03:10:26 am

i'm building a mini replica of the upright pac, and having difficulty figuring something out that isn't obvious to me from the plans at jakobud.

My first question is about the "back piece".  When you standing in fron facing the control panel, is the piece of wood that the top of the bezel is up against the "backside" piece of the cab?  I can't think of explaining it better any other way (i'll try anyway), but I'm wondering if the piece of wood that is the back of the cab also visible above the bezel and below the marquee?

What angle is the marquee at relative to the ground? Is it 90 degrees compared to the ground?

thanks for any help, sorry for my terrible explanation

Title: Re: Quick question for Pac Man Upright Owners
Post by: rescue161 on May 01, 2005, 03:25:09 am

That piece that the top of the bezel is "held in" by is not the back of the cabinet.

27 1/8" from the CP to that "back piece" with the tape measure flat againt the bezel.

Title: Re: Quick question for Pac Man Upright Owners
Post by: teetu on May 01, 2005, 12:05:10 pm

thanks!!!