Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Arcadiac on April 24, 2005, 05:19:54 pm

Title: Spy Hunter II dual yokes
Post by: Arcadiac on April 24, 2005, 05:19:54 pm

Is there any other use for these?  They have thumb and trigger buttons but appear to turn only part of the way, not 360 degrees.  Any value?

ARCADIAC!

Title: Re: Spy Hunter II dual yokes
Post by: SirPeale on April 24, 2005, 05:39:49 pm

None.  You should immediately mail them to me, for disposal.

Title: Re: Spy Hunter II dual yokes
Post by: markrvp on April 24, 2005, 06:08:25 pm

Is this a hose?

Title: Re: Spy Hunter II dual yokes
Post by: Paul Olson on April 24, 2005, 06:10:36 pm

They are pretty much worthless together like that.  Disposal of both of them would be too much for Peale.  I will have to dispose of one of them for you.  :laugh:

Title: Re: Spy Hunter II dual yokes
Post by: GGKoul on April 24, 2005, 06:53:08 pm

I'll take one!

Title: Re: Spy Hunter II dual yokes
Post by: Xiaou2 on April 25, 2005, 04:18:33 am

 By the pic its hard to tell, but I think those use optical encoder for the steering.
This may be impossible to interface for use in most games.

 take a pic of the top - so can see if its an optical encoder

Title: Re: Spy Hunter II dual yokes
Post by: cw on April 25, 2005, 03:56:37 pm

I picked up one of those yokes about a year or two ago.  After a little head scratching and trail and error I got it working and tied it in with a pole position pedal so that I could play spy hunter.  It worked out great and really wasnt that hard to do..... It ended up being a little tall once mounted but played fine.

Title: Re: Spy Hunter II dual yokes
Post by: Arcadiac on April 25, 2005, 06:31:48 pm

Commodeians  ::) ;D every one! 
The small green circuit boards on these have reflective sensor written on them.  I really would like to sell these, as a pair.  Any one care to propose a REAL value for them?  I also have the SH2 board for this, no idea if it works. 
I'm gonna liquidate this and some other stuff soon, I really need a vacation.

Thanks, ARCADIAC!
 

Title: Re: Spy Hunter II dual yokes
Post by: mahuti on April 25, 2005, 11:38:59 pm

I pm'ed you.

Title: Re: Spy Hunter II dual yokes
Post by: GGKoul on April 26, 2005, 12:02:18 am

I PM u2.  I'll take one SH steering wheel off you.

Title: Re: Spy Hunter II dual yokes
Post by: Arcadiac on April 26, 2005, 06:17:55 pm

mahuti and GGKoul, I'll PM ya back after I post this.

Title: Re: Spy Hunter II dual yokes
Post by: Flinkly on April 26, 2005, 11:43:53 pm

where to cut the wires?  just cut them so most of the wire is on mahuti's side. 

...as if you even needed to ask.   ::)