Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: screaming on April 21, 2005, 09:57:09 am

Title: Difference between GPWiz49 Eco/MAX
Post by: screaming on April 21, 2005, 09:57:09 am

The only difference is the Eco one has holes to solder wires into (solder)/40-pin header (no-solder) and the MAX has the screw terminals, right?

  They are both functionally the same (same speed, same code rev, etc), right?

-sab

Title: Re: Difference between GPWiz49 Eco/MAX
Post by: IntruderAlert on April 21, 2005, 10:11:05 am

right

and in the event of any major future developments (which is highly unlikely at this point)
you can upgrade more easily on the MAX

Title: Re: Difference between GPWiz49 Eco/MAX
Post by: Tiger-Heli on April 21, 2005, 10:13:32 am

Also, I think there's a money-back guarantee on the non-solder versions of the boards, but not on the solder ones, but that may have just been an introductory thing.

Title: Re: Difference between GPWiz49 Eco/MAX
Post by: screaming on April 21, 2005, 10:16:49 am

Thanks!  That's what I figured, but I just wanted to be sure.. and make sure there was a recent post for people just getting into the GPWiz49 thing!

Thanks!

-sab

Title: Re: Difference between GPWiz49 Eco/MAX
Post by: Tiger-Heli on April 21, 2005, 10:33:04 am

Quote from: screaming on April 21, 2005, 10:16:49 am

and make sure there was a recent post for people just getting into the GPWiz49 thing!

:laugh: :laugh: :) :) :)

Title: Re: Difference between GPWiz49 Eco/MAX
Post by: MrSaLTy on April 21, 2005, 06:32:22 pm

I believe that Randy has also stated that only MAX version can receive firmware updates also... so if thats imortant to ya..... OTOH, there may not be any more firmware updates in the neat future.