Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: mammoth on April 16, 2005, 09:35:11 am

Title: weird Z80 connector on pac board
Post by: mammoth on April 16, 2005, 09:35:11 am

i have  an original pac board i just found in storage and the slot for the Z80 chip has male connectors sticking out - any idea why? all my other pac and ms pacs (yes i know they were suppose to be the same board)- but this ones different - (1) any idea why i might have removed it (2) do they make a female Z80 (3) easiest and quickest way to fix the problem. thanks guys.

Title: Re: weird Z80 connector on pac board
Post by: tbombaci on April 17, 2005, 03:14:17 am

Pic?

Maybe the connector for the Ms. Pac ribbon cable has been torn off, exposing the pins for the cable?

Do the stickers on ROMS at locations 5e and 5f read "Ms. Pac Man" or "Pac man"?

-Tom

Title: Re: weird Z80 connector on pac board
Post by: mammoth on April 17, 2005, 08:16:46 am

too clean to be torn off - was at ca the day they were coming off the truck (for you youngsters that's C.A. Robinson's in CA.)thought it was the stupidest game i had seen to date - any way back to the topic -I'll check chip i.d.  - any body else have a theory?

Title: Re: weird Z80 connector on pac board
Post by: dabone on April 17, 2005, 08:45:55 am

Pin headers instead of a socket???

(Basically a socket without the plastic that surrounds it.)

Kinda like this but with less plastic around them.


(http://www.roboblock.com/info/i89196/c196-5.jpg)



Later,
dabone

Title: Re: weird Z80 connector on pac board
Post by: mammoth on April 18, 2005, 09:03:59 am

no - these are clean factory looking male pins without any burn marks around them - my kid just got back with  my camera will try to send good pic soon  - thanks bob

Title: Re: weird Z80 connector on pac board
Post by: RayB on April 19, 2005, 10:42:53 am

Expert solderers don't leave burn marks.  ;D

Title: Re: weird Z80 connector on pac board
Post by: mammoth on April 26, 2005, 06:56:21 am

solved my own problem - original pac boards had a male to female addapter which for some reason was removed - found same addapter on on of my ms pac mother boards - don't have any idea why it was removed (it just slips over the male pins and allows the z80 to plug in - also any idea where i might purchase one?