Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: chablis97 on April 14, 2005, 10:38:17 pm

Title: "Konami to JAMMA" adaptor
Post by: chablis97 on April 14, 2005, 10:38:17 pm

I'm in Australia and I'm try to buy a "Konami to JAMMA" wiring adaptor, for what ever reason arcadeshop.com only ship to North America, stange these days I know.  Does anyone know somewhere else where I can puchase one online?

Title: Re: "Konami to JAMMA" adaptor
Post by: Dav on April 15, 2005, 03:49:57 pm

Do you need the track and field adapter?

Title: Re: "Konami to JAMMA" adaptor
Post by: chablis97 on April 15, 2005, 06:17:19 pm

No, I dont need the track and field adapter.  Do you have a web site showing the adaptors?

Title: Re: "Konami to JAMMA" adaptor
Post by: paigeoliver on April 15, 2005, 06:20:46 pm

Quote from: Dav on April 15, 2005, 03:49:57 pm

Do you need the track and field adapter?  I have a lot of jamma adapters for sale.  My konami adapter isn't switchable to track and field like clay's.  Although the next batch I get in will be switchable for normal, track & field and eggs.

Could you also make sure it has all 3 fire buttons hooked up? Every printed Konami adaptor I have ever seen only has two of the fire buttons hooked up.

Also, the wrestling games have slightly different control pinouts as well.

Title: Re: "Konami to JAMMA" adaptor
Post by: Dav on April 15, 2005, 10:42:08 pm

I didn't hook up the third button(except for T&F).

Title: Re: "Konami to JAMMA" adaptor
Post by: paigeoliver on April 17, 2005, 10:55:19 am

Player 1 button 3 is at pin N, and player 2 button 3 is at pin 15.

Code: [Select]

    Solder Side            |             Parts Side
   ________________________________|___________________________________
                -5V            | A | 1 |             +12               
             Speaker           | B | 2 |           Speaker
           2P  Button 2        | C | 3 |          2P  Button 1       
           2P  Left            | D | 4 |          2P  Right
           1P  Start           | E | 5 |          2P  Start       
           1P  Button 1        | F | 6 |          2P  Up 
           1P  Button 2        | H | 7 |        Service Switch 
           1P  Right           | J | 8 |          1P  Left       
           1P  Up              | K | 9 |          2P  Down     
           Coin  (1)           | L | 10|          Coin  (2) 
           1P  Down            | M | 11|       Coin Counter  (1)
          1p  Button 3         | N | 12|       Coin Counter  (2)
          Video Green          | P | 13|        Video Blue
          Video Red            | R | 14|        Video Sync   
                               | S | 15|        2P  Button 3                 
              GND              | T | 16|             GND       
              GND              | U | 17|             GND       
              +5               | V | 18|             +5       
There are 2 boards that use the full pinout, Super Basketball and Strategy-X. I own them both. Strategy-X might be really rare, but Super Basketball is really common.

I already modified my Arcadeshop adaptor to support these titles myself. But I figure if you are gonna do them, then you might as well do them right.

Title: Re: "Konami to JAMMA" adaptor
Post by: Dav on April 22, 2005, 10:27:29 pm

OK, thanks.  I have a super basketball pcb, just never realized it had a 3rd button.   I think I'm just going to hook up p1 though,  Player 2 is more of a hastle since it intereres with the gyruss speaker and I'm not big on supporting cocktails anyway.  P1 will hook up just fine.