Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: alundra on April 06, 2005, 05:35:25 pm
-
anyone know where i can get plastic sheet that has the thickness like ID card? thanks
-
Nope, but if you tell us what it's for, people tend to be able to recommend stuff, sell you their leftovers or even make one for you.
-
to protect my artwork on my CP..
-
Ahh, like a sheet of plexiglass or lexan then is what you mean. There are many places to find it. If you have a local Home Depot, they might sell it, they SHOULD sell it.
-
anyone know where i can get plastic sheet that has the thickness like ID card?
Yep ... I have a bunch ... only problem is that it is all in 2"x3" pieces ... for laminating stuff like ID cards ...
Not gonna do much good for a CPO.
Sorry.
-
Home Depot & Menards both carry it (at least mine do). You can also try the local hardware store, but a may be a bit more expensive.
-
no, i check homedepot, their plexiglasses are too thick for me..what i want is a really thin plexiglass like ID card's thickness..
here the problem, i got a tekken 5 arcade stick, it has a really thin plexiglass glue to the panel surface, but its all scraches, so i want to peel it off and replace with another plexiglass..
-
Is it really a "plastic sheet" meaning it's thin and flexible or is it solid? I think if you go to a copy-shop you might have a chance if it's a thin flexible sheet such as a laminate.
-
Call a local sign shop and ask if they have any scrap .063 clear lexan or acrylic lying around. If they don't, .090 would probably work too.
-
I laminated my CPO at kinkos...
-
Your local glass shop should have some 1/8 plexi cheap, make sure you take exact measurements and they will cut it for you.
-
Menards has .08" in big sheets.