Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Paladin on April 03, 2005, 08:16:15 pm

Title: Faint colors on kortek
Post by: Paladin on April 03, 2005, 08:16:15 pm

I've got a 19" monitor that is labeled Videomaster, but it matches the Kortek K1-2-V0 on Bob Robers site and the Betson Imperial manual.

Title: Re: Faint colors on kortek
Post by: dabone on April 03, 2005, 10:45:03 pm

Bad amp or hooked up incorrectly.

Are you running composite or seperate syncs?


Later,
dabone

Title: Re: Faint colors on kortek
Post by: Paladin on April 03, 2005, 11:56:28 pm

The breakout is setup for composite, and I tried the amp both ways with no change.

Title: Re: Faint colors on kortek
Post by: Paladin on April 07, 2005, 11:50:52 am

Anybody else have any ideas?

Title: Re: Faint colors on kortek
Post by: Ken Layton on April 07, 2005, 06:40:20 pm

Try adjusting the three pots next to the video input connector on the Kortek main board.