Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: hiperco on March 27, 2005, 09:43:30 pm

Title: Vertical Size/Position - not enough adjustment range?
Post by: hiperco on March 27, 2005, 09:43:30 pm

As the topic says, I can't seem to get enough vertical size and/or position adjustment on my WG 25k5515.  The screen has a slight bias towards the top, so the first several lines are cut off (most noticable on vertical games).   Also, the first lines that are visible have a larger space between them.  The monitor has a cap kit.

Any suggestions?

Title: Re: Vertical Size/Position - not enough adjustment range?
Post by: Ken Layton on March 27, 2005, 10:22:49 pm

Try the vert damp adjust.

Title: Re: Vertical Size/Position - not enough adjustment range?
Post by: hiperco on March 27, 2005, 11:02:31 pm

It doesn't seem like any combination of vertical size, damp, position gets it where it needs to be...

Title: Re: Vertical Size/Position - not enough adjustment range?
Post by: hiperco on March 29, 2005, 10:24:05 pm

Looks like Q901 is bad.  I'll try a new one tomorrow.

Title: Re: Vertical Size/Position - not enough adjustment range?
Post by: hiperco on March 30, 2005, 10:56:33 pm

Fixed  8)

Q901 was shorted. 

I've attached the pertinent area of the schematic for those keeping score at home.