Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: pacman on March 25, 2005, 03:40:09 am

Title: loosing sync when switching resolution
Post by: pacman on March 25, 2005, 03:40:09 am

As per topic my HANTAREX MTC 9110 always loose V-sync when switching between games using different resolutions. ::) so that I need to slight adjust the pot.Do you know what this could be ? ???

Title: Re: loosing sync when switching resolution
Post by: DaveJ-UK on March 25, 2005, 10:37:08 am

I had this problem on my MTC 9000 and I can't remember how I fixed it.

What resolution are you using?

I think you need to configure the mame.ini for your set up.

Title: Re: loosing sync when switching resolution
Post by: pacman on March 25, 2005, 06:43:22 pm

I am using 640x240 for the desktop (still have to install Mamewah and using MAME32 temporaly);It looks like the V-pot is very sensible...if I just push gently on it then it goes rolling slowly. Vertical games are OK but for many Horizontal game I need to adjust the V-sync ::)

Title: Re: loosing sync when switching resolution
Post by: DaveJ-UK on March 26, 2005, 12:56:33 pm

Try 640x288 interlaced (I think that's the one)

Title: Re: loosing sync when switching resolution
Post by: pacman on May 04, 2005, 10:50:32 am

Well now I am using Mamewah in 640x480 and nothing changed. All my vertical games works fine but many horizontal games require a pot adjustment (I believe many with 240 H lines). I set up INI files with AVRES utility... ???

Title: Re: loosing sync when switching resolution
Post by: dabone on May 04, 2005, 11:48:58 am

Be sure to remove all non 60hz modes when using the util.


Later,
dabone

Title: Re: loosing sync when switching resolution
Post by: pacman on May 06, 2005, 09:04:58 am

Is there any chance to have the correct INI file to be used with AVRES ? ..I mean the one with the best resolution that the utility should pick up for each game?  ???