Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: mammoth on March 22, 2005, 08:55:40 am

Title: yoke set up - convergence
Post by: mammoth on March 22, 2005, 08:55:40 am

 ???

Title: Re: yolk set up - conversence
Post by: dabone on March 22, 2005, 09:06:08 am

Ok, your doing a yolk swap and need help with the convergence??

Some more details might get you more replies.


Later
dabone

Title: Re: yolk set up - conversence
Post by: SirPeale on March 22, 2005, 09:13:14 am

Have you scrambled your yolk?  You may need a wire whisk.

Or did you mean 'yoke?'

Title: Re: yolk set up - conversence
Post by: MonitorGuru on March 22, 2005, 09:35:04 am

Steering Yoke vs Egg Yolk....


Why do I now have an image in my brain of the Sweedish Chef and Beaker working on a monitor....



To the original poster: Need details.. Assume you are replacing the yoke and have to reconverge.  Google for "Reconverge" or "arcade monitor convergence" and check Randy Fromm's site. Also check the SCI.ELECTRONCS FAQ

Title: Re: yolk set up - conversence
Post by: Ken Layton on March 22, 2005, 10:38:58 am

Actually you could download the Electrohome G07 or Wells-Gardner k7000 manuals as they should how to do the yoke and the convergence rings.

Title: Re: yolk set up - conversence
Post by: mammoth on March 22, 2005, 10:52:55 am

Quote from: Peale on March 22, 2005, 09:13:14 am

Have you scrambled your yolk?

Title: Re: yolk set up - conversence
Post by: mammoth on March 22, 2005, 11:01:48 am

Quote from: Ken Layton on March 22, 2005, 10:38:58 am

Actually you could download the Electrohome G07 or Wells-Gardner k7000 manuals as they should how to do the yoke and the convergence rings.

thanks  for the real answer - it's been several years since i tried (and i was using the manuals) got close but it never seemed to be just right. just wondering if you had any hints or obvious pitfalls. thank again.