-
Hey all. I have been building custom cocktail tables and am closing down my shop. I am writing here just to get feedback and let you know I am in the process of selling/dumping the parts for these on ebay.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=6161208189
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=6161213682
Below is a photograph of the cabinets I make.
(http://www.codebot.org/ebay/kit.jpg)
I designed and fabricated the parts for these cabinets. The two parts I am selling on ebay are the control panels for these cabinets and the glass clips. Here are pictures of these parts.
(http://www.codebot.org/ebay/panel.jpg)
(http://www.codebot.org/ebay/clips.jpg)
The control panel will fit a standard Ms Pacman style cocktail that accepts 11" panels.
You can review more information about these parts at the actions linked above.
If you are interested in buying these parts individually or in bulk, send me a message or respond in this thread with any questions.
Finally, I still have kits, buttons, coins doors, joysticks, ipacs, and anything else you ight need to build a complete system that I need to sell.
Thanks all!
-
How much are your kits?
What all is in the kit?
-Goz
-
All have left are 3 cabinet kits. The kitx contains oak veneered wood, stained, sealed, with black t-molding already installed, and is precut for mini coin doors and standard 6X9 speakers. It also comes with all the hinges, screws, supports, and fasteners you need to assembly the empty cabinet.
When assembled it is fully finshed exactly like the photo at the top of this thread (minus the hardware ... glass, monitor, control panel ect).
The finished, stained, and sealed panels in the kit are represented by the schematic below.
(http://codebot.org/design/assembly.gif)
The kit looks like this 3D image and swings open with a hinged door as pictured below.
(http://codebot.org/design/3dswing.gif)
The control panels and glass clips listed at the top of this thread fit perfectly into the cabinet kit.
The kits come in a flat box and costs $275 plus shipping.
-
I just thought I'd post another picture.
(http://www.codebot.org/design/eagles_kit.jpg)
-
PM Sent
-
How much would shipping be to Canada?
-
How much would shipping be to Canada?
$7.50 UPS ground for the control panels or glass clips.
$40.00 UPS ground for the kit.
-
GGKoul--remember UPS' slogan for entering into Canada--"if there's a way to gouge our customer, we'll find it" in other words NEVER ship ups into canada.
-
Another table configuration. The sounds system runs on a 12V DC 80 watt amplifier and two 6X9 speakers
(http://www.codebot.org/design/redskins_kit.jpg)
-
hey those are nice looking cabs!
-
Letting you guys know the auctions are going to end in about 1 day.
-
I just wanted to say that I got a cocktail kit and control panels from sysrpl and they're not only top notch, but were a good deal, financially, as well.
I don't know if he has any more cocktail kits, but if he does and you're thinking about a kit for yourself, you should have no worries in buying one from him
Thumbs up.
(http://img100.exs.cx/img100/2720/wood7xb.jpg)
-
I bought one of his kits as well. The quality was top-notch.