Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: Wyluli on March 08, 2005, 01:53:19 pm

Title: WANTED: 10 feet of blue T-molding. 3/4"
Post by: Wyluli on March 08, 2005, 01:53:19 pm

If anyone has 10 feet of extra blue (dark blue, not light) 3/4" T-molding they would like to sell for cheap, let me know.  I need 10 feet and the minimum order is 20 so thought I would check to see if anyone has extra.

P.S. do you use a router to cut the t-molding groove in the MDF?  That is one tool I don't have, wondering.

Thanks.

Title: Re: WANTED: 10 feet of blue T-molding. 3/4"
Post by: MilitiaMan on March 08, 2005, 10:15:52 pm

Don't have any blue T-Molding, but yes you will need a router to cut T-molding grooves.

You need a special bit for it, too. Can't remember what it's called, though ....

Steve

Title: Re: WANTED: 10 feet of blue T-molding. 3/4"
Post by: cholin on March 09, 2005, 03:39:52 pm

Ive seen places around where you can order samples of T-molding.  If you can get maybe a sample or buy 10 feet, it wont hurt your wallet.  Check www.t-molding.com

Title: Re: WANTED: 10 feet of blue T-molding. 3/4"
Post by: Wyluli on March 09, 2005, 03:55:26 pm

Yes, I can get 20 feet of T-molding for $10 plus shipping.  Just thought I would check to see if anyone had extra they wanted to get rid of.  If not, I'll just order the 20'.  No biggie.  ;D

Title: Re: WANTED: 10 feet of blue T-molding. 3/4"
Post by: cholin on March 09, 2005, 04:13:18 pm

Hey, ya never know, that extra 10' could do you some good if you ever decide to mess up lol :)

Title: Re: WANTED: 10 feet of blue T-molding. 3/4"
Post by: Vicious on March 09, 2005, 08:37:31 pm

Quote from: MilitiaMan on March 08, 2005, 10:15:52 pm

You need a special bit for it, too. Can't remember what it's called, though ....

You'll find the slot cutter you need here (http://mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bt_slot.html#Anchor%20slotct3w).