Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Wyluli on February 26, 2005, 08:53:47 pm
-
Anyone have the orginal dimensions for a Tempest Upright control panel?
-
Upright or Coctail?
I've got Tempest coctail panels.
-
When you say exact, you're making it out of metal?
-
When you say exact, you're making it out of metal?
-
I'm missing the marquee retainer too, so if you could post pics and demensions of that too, I'd be grateful. It would be nice if I could build a marquee retainer like the original and then purchase a repro marquee.
-
I can measure mine tonight if I can find a tape measure.
-
I sent you a PM on a panel. Will try to get dimensions today.
-
Here's a bunch of pics with some dimensions. Couldn't find anything to measure the angles with so stopped for now. After these initial pics you may decide to buy an original (I know I would).
The metal looks to be 1/16" thick.
The first two pics gives you an idea of the shape. 3 metal bends plus a piano type hinge (upper left hand side).
The small piece of metal on one side of the hinge bolts to the cab with 3 bolts, washers, lock washers, and a nut. It is 1" from the center of the hinge to the edge. The entire panel is 23.5" wide.
The metal on the other side of the hinge (which makes up the entire rest of the panel) has the first bend (from the hinge) starting after 5.5".
There is where I stopped on measuring for now. More pics are coming with things you'd need to do if you want it authentic. If you're still serious I can get more measurements.
-
Shows the other side with some graphics.
-
Shows pics of the metal retainers that the latches grab onto. Also notice the square hole for the spinner bolts and the little half circles on the button holes.
-
Top side.
-
Closeups of spinner holes and button holes.
-
Holy cow. Thanks for the info. I'm gonna need more tools...and more money...and while I'm daydreaming let's throw in a house and new car while i'm at it ;D
-
One went on Ebay yesterday with spinner and cones for about $40. One today for about $25 without cones but with spinner and play buttons. Would save a ton of work.