Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: lostboy4480 on February 26, 2005, 07:01:00 pm

Title: D9200 repair question
Post by: lostboy4480 on February 26, 2005, 07:01:00 pm

Hi,

I have a quick question..

I just received my D9200 and wanted to test it quickly.

Title: Re: D9200 question
Post by: hiperco on February 26, 2005, 08:20:10 pm

You should be able to test with VGA cable and DOS.

Doesn't sound good :(

Title: Re: D9200 question
Post by: lostboy4480 on March 02, 2005, 01:47:43 am

Update * I just finished talking to a WG tech and he recommended replacing C801 & C802 does anyone have a board layout diagram as I can't seem to find one.

Thank you

Title: Re: D9200 repair question
Post by: paigeoliver on March 02, 2005, 01:58:15 am

You won't need a diagram, they should be labeled on the board.

And a working D9200 will display a "no signal" picture when plugged in and not getting a signal.

Title: Re: D9200 repair question
Post by: lostboy4480 on March 02, 2005, 02:00:57 am

tnx for the reply...  I thought it should display that message but wasn't sure..

Now I look more closly at the board I can see most of the components labeled.

Now to find a monitor repair guy locally as I am not too confident with the idea of discharging the monitor lol

Title: Re: D9200 repair question
Post by: Ken Layton on March 02, 2005, 09:44:49 am

So you got a brand new monitor and it was bad out of the box?

Title: Re: D9200 repair question
Post by: lostboy4480 on March 02, 2005, 11:11:15 am

I was the lucky winner of the monitor from Retro Blast's competition.  so the monitor wasn't new.  Unfortunately the DHL guys don't know what fragile means lol