Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: liche on October 27, 2002, 01:07:05 pm

Title: Coin Door Text Labels
Post by: liche on October 27, 2002, 01:07:05 pm

I'm in the process of refurbishing my Coinco Coin Door and on the lighted coin return buttons, one of the internal labels is really messed up.

Is there anywhere I can download a copy of this graphic so I can print out to replace this label, or somewhere I can get a new label.

These are the same exact labels as shown in the previous Coin Door painting post on this group in the picture shown there.

Thanks
L

Title: Re:Coin Door Text Labels
Post by: SNAAAKE on October 27, 2002, 01:19:06 pm

there ya go.

http://oscarcontrols.com/gallery04.htm

Title: Re:Coin Door Text Labels
Post by: liche on October 27, 2002, 03:54:29 pm

Great.  That helps a bunch.

Any chance there are standard labels to download anywhere for say Player 1 / Player 2 illuminate pushbutton for standard arcade sized buttons anywhere as well.

Thanks

Title: Re:Coin Door Text Labels
Post by: SNAAAKE on October 27, 2002, 07:00:20 pm

you can make that yourself I guess...however you wanna make then print it out.

I dont know any place that has that kind of print.

Title: Re:Coin Door Text Labels
Post by: Chris on October 28, 2002, 10:37:42 am

When I printed out my replacement, I had tro print it twice and put the two copies in on top of each other to keep light from bleeding through the black.

In the image below, one of the labels is original and one is a printed copy.

(http://mywebpages.comcast.net/celamantia/mamecab/images/New_Coin_Door.jpg)