The NEW Build Your Own Arcade Controls
Main => Monitor/Video Forum => Topic started by: bluemanop on February 18, 2005, 12:30:55 am
-
My friend actually came across a TNMT 4 player machine today. The machine was in good functional order for 150 bucks. I did have a joystick with a minor connection contact problem (I was able to fix this) but the monitor was another story. Although very sharp and bright it has a few vertical dark shadows on the left side of the screen. These vertical marks tend to be a little less visible when the machine is a little bit warmer.
Could this be from a bad cap or is this just a yoke adjustment situation? Anyone have any ideas?
-
You should post in the monitor/video forum and hopefully Ken or one of the other arcade-tech gurus will see it and be able to help.
-Ace-
-
Dedicated Ninja Turtle machines came with a Wells-Gardner 25k7191 monitor. It's not a yoke problem, but remember that this monitor is at least 13 years old. You need a capkit for that monitor for sure.
-
Do you know where I can get a cap kit and a tool to discharge the power from the tube?
-
Try www.dameon.net/BBBB/ for info on discharging monitors and www.therealbobroberts.com for capkits.
-
Anyone ever tell you, You are the man?
-
Sounds like jailbars...as ken stated, a capkit will fix it.
-
I will take a picture of it, plus I want to verify the model of the monitor just in case it was ever replaced.