Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: stellarola on February 01, 2005, 02:16:19 am
-
Hey guys, just wanting to see pics of any custom control panels people have made for the standard dynamo cabinet. I just kinda wanted more arm room between players, because the standard dynamo setup is a little cramped.
-Ben
-
How wide is the dynamo cab? There are several styles of dynamo cabs. There are cabaret, widebodies, etc.
If you have some drafting skills, go to the happs website and there are drawings of the components and you can draw circles on paper at 1:1 scale.
-
I have a Leland Quarterback and built this panel for it.
-
This is my cp layout, it's based on a 25" control panel... a cramped everything in!! :P
-
Btw, it's a Visio file, so if you like I can mail it to you. Ohh one more thing those to purple blocks, are the sideboards of the arcade :)
-
damn that thing is cluttered, i couldnt stand having the trackball so close to a joystick
-
I know you didn't ask for a 4 player, but I thought I'd share mine anyways ;D
(My Dynamo cab was a 4 player to begin with).
Inspired by Jakobud 8)
-
I have a dynamo cab and kept the original "Street Fighter II" layout in it and squeezed a happs 3" trackball in the middle. And I mean squeeeeeeezed. Brained, I like your layout but I'd personally have a problem with the 1 player stick being that close to the edge with that 1" lip sticking up on each side....I see you left room for the supports underneath on each side...which makes it almost impossible for pinball buttons...unless you have a router. The machine I bought had plexiglass over the CP and the bolts they drilled for that had to be routed out of the side supports underneath. I'll mae up a website and finally put it out there....I need to take some pics....been too busy playing the darn thing....