Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: hitandrun on January 23, 2005, 10:54:27 am

Title: Need help with selecting trackball parts..
Post by: hitandrun on January 23, 2005, 10:54:27 am

I've been searching around the forums, and can't find all the info I need, so I thought I would ask.

Title: Re: Need help with selecting trackball parts..
Post by: NoOne=NBA= on January 23, 2005, 03:41:13 pm

The BALL doesn't actually stick up any farther than the regular 3".

It's a high LIP trackball, meaning that the surrounding LIP on the base is taller than the standard ones.
This is to accomodate putting plexi over the graphics--as opposed to the regular lip going on a Centipede or Crystal Castles with only a thin backprinted overlay.

Title: Re: Need help with selecting trackball parts..
Post by: hitandrun on January 23, 2005, 09:38:04 pm

OK... makes sense now... Thanks for the reply!