Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: moonpatrol 4 lyfe on January 20, 2005, 03:51:27 pm

Title: Konami Molex connectors?
Post by: moonpatrol 4 lyfe on January 20, 2005, 03:51:27 pm

Does any one know which Molex connectors Konami used in their 4 player cabinets to interface players 1-4 with the internal circutry of the Cab?  I have a G.I. Joe Machine (which I believe was a TMNT) that has one of these connections per player to allow the easy removal of the CP.

Thanks,
Bill

Title: Re: Konami Molex connectors?
Post by: quarterback on January 21, 2005, 12:03:12 am

I have a Konami cab and may have asked a similar question (if you have the same 8pin-2row connectors I've got).  Check out this (http://forum.arcadecontrols.com/index.php/topic,27778.msg231246.html#msg231246) thread.

If they're the same connectors, then the cheapest solution is to buy some 4-pin molex power supply connectors (since they'll fit onto 4 of the 8 pins) or cut the wires and try something else.

Title: Re: Konami Molex connectors?
Post by: moonpatrol 4 lyfe on January 24, 2005, 02:11:58 pm

Bob Roberts has the 8 pin connectors, but I dont believe they're on his parts list.  I have 15 pin molex connectors =(.  Does anyone know any good 15 pin molex pins that I can use on my cab in place of the ones already there?

Bill

Title: Re: Konami Molex connectors?
Post by: ErikRuud on January 24, 2005, 02:36:53 pm

Try http://www.mouser.com

They have all kinds of Molex connectors.