Build Your Own Arcade Controls Forum
Main => Project Announcements => Topic started by: Brad Lee on October 15, 2002, 04:02:48 pm
-
I shall fear no evil..
And so I begin the task of putting together a MAME cabinet, I've got enough planning in that I think it'll work
I found a cabinet- A full size Tempest, to be picked up this weekend. It's really a bare box, so there is no control panel, no monitor, a gaping hole for a coin door, no marquee.. IMO perfect for some of the modifications I think would be nice touches
The control panel I have worked up in visio & photoshop, similarto this(I'm at work so this is a VERY crude mockup)
http://www.sixsixsix.com/sa/tempestcp.gif
It may be a little too deep, so I may move the monitor backandreclaim a few inches there, or I may come forward a few inches- remember there's no existing CP, so Ive got plenty of room to work with
For Tab, Pause, Reset, Advance, I plan on using mini-momentarys, recessed into the area under the marquee header, again since there's no existing marquee I've got full liberty
The PC I should be able to mount to one of the inside walls of the cab, giving easy access to ports and cards.
IPac & OptiPac, the spinner will probably end up as an Oscar2(for size). The joysticks are still a debate- I like the small balltops at ultimarc, as well as happ's, so I'll probably get a pair of both and just eBay the ones I don't use. The trackball is still in limbo, between finding one on ebay, happs, or a kids serial PC trackball. Buttons will be the ultiamte pushbuttons, and hopefully I can find a pair of the lighted atari start buttons
The artwork on the cab looks good except for the bottom 1/5th or so, peeled or missing.. Options here are getting a new pair for the original look, completely different artwork, solid color, gradient.. or what popped into my head this morning- vinyl car flames! Found a decal shop that has them about 60"x15", which would fit perfectly on the side..
CPO & Marquee I'm leaning toward jsut designing something original, but who knows?
I'm sure I'm not thinking of something, and over thinking parts also, but I think it'll all work out in the end
Progress I'll be posting at http://www.sixsixsix.com, hopefully with plenty of pics especially any of the non-standard things. And I'm sure I'll be asking a lot of questions in here as well...
-
your cp image isn't upped or named something differnt or in a diff directory.... I love your custom 404 message btw...
Good luck with the cabinet... I believe my cabinet is the same style... an old taito cabinet...
rampy
-
yeah, I left the directory off
it suits my needs for old school action.. spinner, tack, dual joysticks, a few buttons each, maybe some head to head
-
are you left handed or is the layout optimized for 2 joystick games (robotorn, battlezone, etc...) ?
also note: if you use tball for golf or golf esque games you might smack your hand into your spinner if it's placed at 12 o'clock... just a thought... (you might end up hitting the cabinet bezel glass anyways if you're really rolling with the tball...
*shrug* ymmv
rampy
-
[quote author=rampy also note: if you use tball for golf or golf esque games you might smack your hand into your spinner if it's placed at 12 o'clock... just a thought... (you might end up hitting the cabinet bezel glass anyways if you're really rolling with the tball...
Having my spinner in front of my trackball and the trackball close to the glass were the biggest layout mistakes I made! I have to do all trackballing (for games that spin) with my thumbs... :(
--Chris
-
[quote
Having my spinner in front of my trackball and the trackball close to the glass were the biggest layout mistakes I made! I have to do all trackballing (for games that spin) with my thumbs... :(
--Chris
Hmmmmm point taken.. once I get actual measurements of the CP, it'll be time to make the cardboard mockups, complete with poolballs & beercaps(is it a coicidence they're jsut the right size?)