Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: smackrabbit on December 08, 2004, 06:49:36 pm

Title: SF2 Cabinet Conversion
Post by: smackrabbit on December 08, 2004, 06:49:36 pm

I wanted to convert my SF2 CE cabinet into a MAME cabinet.  I imagine what I need is a computer (of course), a J-PAC for an interface, and an ArcadeVGA board for the monitor.  Is there anything wrong with this setup?  I'll attach files showing the game boards and controls.

Title: Re: SF2 Cabinet Conversion
Post by: smackrabbit on December 08, 2004, 06:50:03 pm

More Images.

Title: Re: SF2 Cabinet Conversion
Post by: smackrabbit on December 08, 2004, 06:50:19 pm

Last Image.

Title: Re: SF2 Cabinet Conversion
Post by: paigeoliver on December 08, 2004, 10:27:05 pm

Everything looks good. Here are the final steps.

#1. Unhook ALL the wiring from your power supply, that is the black box in picture 1.

#2. You have to run the wires for the kick buttons to the JPAC separately, it is pretty easy.

#3. Box up your old PCB carefully and mail it to.

Wingate Inn
ATTN: Paige Oliver
13615 Riverport Drive
Maryland Heights, MO 63031

Title: Re: SF2 Cabinet Conversion
Post by: Snarbald on December 08, 2004, 10:30:56 pm

I'm gonna mail you a box of poop. ;D