Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: vader on December 06, 2004, 09:30:28 pm

Title: Need advice on panel depth
Post by: vader on December 06, 2004, 09:30:28 pm

Designing a new panel that will go onto the upright and need to know the recommended depth I should use since I am now playing Golden Tee and I know for sure I would whack the screen, From the bottom of the TB to the top of my current panel is 12" right now and I know I definitely go farther than that, total depth of my panel is 18"....I was thinking about 24" but might be a tad large

Tim


Edit :  Actually from the angle I was standing at, didn't seem like enough room, but 18" should be just about right...will just minimize the overhand a litte bith

Title: Re: Need advice on panel depth
Post by: Hiub1 on December 06, 2004, 10:26:57 pm

Mine is 22'' and the room is plentiful. I would think with 18'' you should have no problems. I am in the midst of making a new CP, so I will try out the 18'' and see how it feels.