The NEW Build Your Own Arcade Controls

Main => Main Forum => Topic started by: nullb0y on September 30, 2002, 05:01:54 pm

Title: NuLLpAd ART
Post by: nullb0y on September 30, 2002, 05:01:54 pm

oki inished nullpad all it needs now is a neon green lamminate or paint any one know where i could locate some?
after that im gonna take the nullpad logo from my site add a I (nullpadI) and print it and puit it on my pad any sugestions on how to do this i cant use plexi btw

Title: Re:NuLLpAd ART
Post by: rampy on September 30, 2002, 05:23:12 pm

Even though you drive me nutz... I'll post a suggestion.

You can use a product like 3m spay adhesive to affix your artwork to  your control panel surface (after you print it out on paper/photo paper/whatever)... Then you can use light coats of clear coat to finish/protect it...

This also assumes you've already painted the base color or laminated it already... (neon green?!)

Good luck.


Rampy

Title: Re:NuLLpAd ART
Post by: nullb0y on October 01, 2002, 08:55:42 pm

so prety much:
1. paint color of choice
2 spray adhesive artwork on
3. clear coat it
4. play
lol im not shure if im gonna paint it mabey if i replace the current contact paper its kinda peeling up  some glue coukld fix that though