Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: teef two on November 23, 2004, 06:00:40 am

Title: Just to say thanks
Post by: teef two on November 23, 2004, 06:00:40 am
to all of you who provided criticism of my control panel layout. Although I would have ended up with something workable the feedback here has enabled me to create a much more ergonomic design.

I've now finalised my design and printed out the template. Drilling and routing will start tomorrow.

The picture below shows the overlay I may put on there. The panel itself is rounded at the corners nearest the players.



Title: Re: Just to say thanks
Post by: paigeoliver on November 23, 2004, 06:12:26 am
Its your kids Marty, you've got to do something about your kids!
Title: Re: Just to say thanks
Post by: teef two on November 23, 2004, 06:23:25 am
It's not a control panel, it's just some weather sensing equipment!
Title: Re: Just to say thanks
Post by: paigeoliver on November 23, 2004, 07:01:12 am
Did you use thick enough wiring to handle 1.21 jiggawatts to ground?  :angel:
Title: Re: Just to say thanks
Post by: Gunstar Hero on November 23, 2004, 11:30:19 am
Are you telling me that that sucker is nuclear??
Title: Re: Just to say thanks
Post by: GGKoul on November 23, 2004, 11:34:31 am
McFly...
Title: Re: Just to say thanks
Post by: missioncontrol on November 23, 2004, 12:04:50 pm
is that big red thing the flux capacitor?
Title: Re: Just to say thanks
Post by: SirPeale on November 23, 2004, 12:06:07 pm
Quote from: GGKoul on November 23, 2004, 11:34:31 am
McFly...

No, no no...

McFLY!!!
Title: Re: Just to say thanks
Post by: Gunstar Hero on November 23, 2004, 12:20:43 pm
Quarters..? Where we're playing we don't need... quarters.
Title: Re: Just to say thanks
Post by: Jabba on November 23, 2004, 12:24:01 pm
Hey teef two...Quick question for you....

How are you planning on printing the CPO? On a bubble jet or are you having it professionally done? Just curious...
Title: Re: Just to say thanks
Post by: teef two on November 23, 2004, 03:56:54 pm
Jabba,

I pretested a print of that at work (hey why waste your own ink! ;)) and when it's blown up to full size it's less than satisfactory. However by a stroke of good fortune I picked up a BTTF poster today on ebay for