Build Your Own Arcade Controls Forum

Main => Consoles => Topic started by: rchadd on November 17, 2004, 09:24:01 am

Title: LPC Rebuild kit for xecuter 3 xbox modchip
Post by: rchadd on November 17, 2004, 09:24:01 am

I have just bought the LPC Rebuild kit with the Xecuter 3  mod chip from baldbouncer.co.uk

however there is no installation instructions for the rebuild kit available on their website or xecuter website.

wondering if anyone else here has used it and provide advise on installation of the LPC rebuild kit.

cheers

Title: Re:LPC Rebuild kit for xecuter 3 xbox modchip
Post by: DYNAGOD on November 17, 2004, 10:07:45 am

what exactly is it?
rebuilding what?
illuminate me :)

Title: Re:LPC Rebuild kit for xecuter 3 xbox modchip
Post by: rchadd on November 17, 2004, 10:16:06 am

i got this which assumed should help with the LPC rebuild part of the xecuter installation but there are no instructions

http://www.baldbouncer.co.uk/catalog/product_info.php/products_id/90?osCsid=a85c89c16dd44ea2b34f1f81577d5ce0

it seems to replace the required wiring that routes signals back to the LPC header connector.

from the photo it looks like i just lay the board on the pcb in correct orientation and simply solder it to the motherboard at the various points around the pcb.

just wondered if there was anything else i need to consider....

Title: Re:LPC Rebuild kit for xecuter 3 xbox modchip
Post by: rchadd on November 17, 2004, 11:23:28 am

i found this in teamxecuters news archive (shame it was not included in the actual installation instructions)

http://www.teamxecuter.com/index.php?name=News&file=article&sid=99&mode=&order=0&thold=0