Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: paigeoliver on November 12, 2004, 03:52:51 pm

Title: Coin door problem.
Post by: paigeoliver on November 12, 2004, 03:52:51 pm

Ok, not a big problem, but I am doing a 2 player cabinet, that has TWO over/under doors on it.

Think I should wire door one to player one (both slots), and door 2 to player 2 (both slots).

Or slot one to player one (both doors), and slot two to player two (both doors).

Title: Re:Coin door problem.
Post by: MameJunkie on November 12, 2004, 04:42:28 pm

I vote for left slot (P1) right slot (P2) on both doors.
Think people are use to that already so hopefully less confusion.

Title: Re:Coin door problem.
Post by: SirPeale on November 12, 2004, 05:05:26 pm

I've got a similar issue; it's an old Wrestlefest cabinet.

I think I'm just going to replace the front, and cut one hole for one coin door.

Title: Re:Coin door problem.
Post by: paigeoliver on November 12, 2004, 05:29:47 pm

I also thought about replacing one coin door with a custom insert that basically holds the computer.

I still might do that.