Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: lucindrea on November 09, 2004, 10:40:04 pm
-
ok , about a year ago when i started getting togher all the parts for my cab i got my over/under coin door first , it came with token mechs ( eaisly adjusted to 25C for one and any coin for the other ) ... the pain on the front was all rusted and chiped , so i figured i would re-pain the thing .. so i took all the mech parts out and stuck them in a box for when i needed to put the thing in my cab ...
now it's time to put it back in my cab and i'm looking at this box of parts thinking "what idiot took this thing apart?!" :-[
dont suppose anyone knows any detailed drawings or photos of how all the parts go back? .. i looked at happs page and it wasnt much help , and i know i could figure it out with time , but i just dont want to make the mistake of missing somthing .. best i could find on the net was this pic
http://www.aros.net/~rayj/action/games/digdug/cab9.jpg
heh .. even the wire guards are the same color as mine :-) ...
-
I think there's an exploded view on Happ.
If you lived close by I could have it together in about 1/2 an hour or less, but I bet you don't.
-
looking at your profile brings up Brattleboro, VT .... doesnt sound close to philadelphia hehe
ok , i must of missed it on happs site somewhere ... like i said , given enuf time i will most likely figure it out , but i have found a quick post here sometimes saves a ton of frustration
-
That's too far to drive, but if you toss those parts in a box and send it parcel post (include return postage) I'll put it back together.
-
i've been able to work most of it out , only to find that i've lost a screw or 2 over time .. luckly their is a hardware store 2 blocks down the street that has drawers and drawers of screws/nuts/bolts etc and you can buy 1 , 2 , 200 , 200000 at a time .. nice place when your 1 screw shot of somthing.