Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: goofy on September 28, 2004, 11:58:26 am

Title: Picture of Oscar Controls USB Mouse interface?
Post by: goofy on September 28, 2004, 11:58:26 am

Does anyone have pictures of these Oscar Controls products?
1) USB Mouse interface
2) USB mouse w/button harness
3) Trackball harnewss for USB mouse interface
4) Optic Board

Thanks.

Title: Re:Picture of Oscar Controls USB Mouse interface?
Post by: Lilwolf on September 28, 2004, 12:44:06 pm

Sorry, at work so I can't help you....

but..

the optics are shown on each of his pictures of his spinners.  They are wide and narrow... they aren't the standard size for trackballs btw.  

His mouse hacks are just that.  I'm not sure if they are always the same mouse board.  But take a mouse apart... add some professional soldering (much better then I do) adding pins to easy plug / unplug connectors to the optics.

His cables have standard ends that fit the pins on the optics and mouse hack.

Title: Re:Picture of Oscar Controls USB Mouse interface?
Post by: Bgnome on September 28, 2004, 12:52:15 pm

Quote from: goofy on September 28, 2004, 11:58:26 am

Does anyone have pictures of these Oscar Controls products?
1) USB Mouse interface
2) USB mouse w/button harness
3) Trackball harnewss for USB mouse interface
4) Optic Board

Thanks.

(http://www.oscarcontrols.com/images/USB1.jpg)

(http://www.oscarcontrols.com/images/happ_harness.jpg)

cant remember if this is the updated optic board or not:
(http://www.oscarcontrols.com/images/DET-1101_1.jpg)

Title: Re:Picture of Oscar Controls USB Mouse interface?
Post by: goofy on September 30, 2004, 12:08:00 am

Perfect, thanks.

BTW, what's on the end of the mouse hack (not the end soldered to the board, but the end you connect to your devices)?

Title: Re:Picture of Oscar Controls USB Mouse interface?
Post by: Sasquatch! on September 30, 2004, 10:35:25 pm

Quote from: goofy on September 30, 2004, 12:08:00 am

Perfect, thanks.

BTW, what's on the end of the mouse hack (not the end soldered to the board, but the end you connect to your devices)?

You mean the bottom of that picture?  The mouse buttons.

Title: Re:Picture of Oscar Controls USB Mouse interface?
Post by: goofy on October 02, 2004, 01:33:24 pm

No, I'm talking about the top picture of the mouse hack. What kind of connectors are at the end of the wires. The wire that is connected to the board on one end and what's on the other (not the USB cable)?

Title: Re:Picture of Oscar Controls USB Mouse interface?
Post by: Bgnome on October 02, 2004, 01:36:34 pm

i think thats the 4-pin connector for the optic board..