Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: ghool on September 24, 2004, 01:55:27 pm

Title: Have I screwed my monitor?
Post by: ghool on September 24, 2004, 01:55:27 pm

Hi, I just got a arcade cab And I was Just setting it up and i powered up the moitor (its a sony trinitron) and by accident the power on button board
touched the metal shelding casing a spark and cutting the electric out.

Monitor may of been knackerd in the 1st place but I don`t think it was.

Now it dosent seem to do anything....Help please!!!!

Title: Re:Have I screwed my monitor?
Post by: southpaw13 on September 24, 2004, 02:16:06 pm

Start looking for fuses, hopefully you find one...

Southpaw

Title: Re:Have I screwed my monitor?
Post by: DaveJ-UK on September 24, 2004, 03:17:32 pm

If you have one of those circuit leak detector thingies (technical term) on your socket it will have been tripped. It will probably take out the lights too. If that's the case it's an easy fix but other than that you'll have to start checking fuses southpaw said.