Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: realiste on September 23, 2004, 03:36:31 pm

Title: ctrlr Mamewah ?
Post by: realiste on September 23, 2004, 03:36:31 pm

Who body use with a pad side winder or other pad In the Mamewah ?
So, this body could poster his crlr file

can be to help me, because I do not arrive to configured the file ctrlr Mamewah.
thx a lot ,realiste

sorry for my english.

Title: Re:ctrlr Mamewah ?
Post by: Minwah on September 24, 2004, 06:25:33 am

This is the important part:

# main form
UP_1_GAME         "DIK_UP

Title: Re:ctrlr Mamewah ?
Post by: realiste on September 25, 2004, 06:16:57 am

Thx man.

but same issue
I tested with 1 win xp and 1 win2k=>same issue
my pad snes (lpt1 port) and side winder (com port) not respond.
all pad recognized on the Game Controllers list
i tested the pad 1 by 1 =>same issue

the keybord and mouse respond
with all emu not pb

mame , snes9x ,zsnes ...=>worked ...

but mamewah=>the pad no worked i not understand

I not found the solution . :'(

thx for all.
 ??? I believe that there is no solution
sea peace

Title: Re:ctrlr Mamewah ?
Post by: Minwah on September 27, 2004, 07:50:06 pm

Quote from: realiste on September 25, 2004, 06:16:57 am

Thx man.

but same issue
I tested with 1 win xp and 1 win2k=>same issue
my pad snes (lpt1 port) and side winder (com port) not respond.
all pad recognized on the Game Controllers list
i tested the pad 1 by 1 =>same issue

the keybord and mouse respond
with all emu not pb

mame , snes9x ,zsnes ...=>worked ...

but mamewah=>the pad no worked i not understand

I not found the solution . :'(

thx for all.
 ??? I believe that there is no solution
sea peace

The only thing I can think of is that maybe the driver you are using is not DirectX8+ compatible??