Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: koolmoecraig on September 20, 2004, 03:12:42 am
-
Hello,
I am trying to find a source for some switches for my coin slots. The switches I have now function fine normally, but when they are hooked to my ipac, they work but come up as a stuck input which prevents me from being able to use the ipac shift function.
Thanks,
Craig
-
U mean these ? :
http://www.happcontrols.com/index.html?http://www.happcontrols.com/cc/42107500.htm! (http://www.happcontrols.com/index.html?http://www.happcontrols.com/cc/42107500.htm!)
-
or them:
http://www.happcontrols.com/index.html?http://www.happcontrols.com/cc/42315700.htm! (http://www.happcontrols.com/index.html?http://www.happcontrols.com/cc/42315700.htm!)
-
Kool, you may have them wired up wrong.
There's a thread somewhere on this board about which pins to wire to, and which ones NOT to.
-
you wire them up just like any other button switch on your cabinet. Ground is the bottom pin and one wire to NO. The switch should be labelled.