Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: barranger on September 12, 2004, 10:11:48 pm

Title: Looking for the demensions of this cab (Attn: Paige)
Post by: barranger on September 12, 2004, 10:11:48 pm

Hey folks,

     I'm looking for the plans for this cab, it used to be a street fighter II cab (but from searching this site I've learned that most if not all SFII cabs were converted cabs)  I've seen the cab in good condition, but I've no idea what it's called.  

Thanks a million in advance,
Barranger

Title: Re:looking for plans to this cab
Post by: barranger on September 12, 2004, 10:12:24 pm

Side View

Title: Re:looking for plans to this cab
Post by: barranger on September 13, 2004, 11:31:19 am

After searching high and low it seems that this is the same cab:

http://images.webmagic.com/klov.com/images/S/cSuper_Street_Fighter_II_Turbo.jpg (http://images.webmagic.com/klov.com/images/S/cSuper_Street_Fighter_II_Turbo.jpg)

All I really need is the demensions of the CP.  If anyone knows them or has one of these cabs around and wouldn't mind a little work with the tape measure it would be greatly appreciated.

Thanks again,
Barranger

Title: Re:looking for plans to this cab
Post by: RayB on September 13, 2004, 11:32:47 am

Kinda looks like Centipede with a new bottom added to it.... Paige will know.  ;D

Update: 5:06pm: It's not a Centipede.

Title: Re:looking for plans to this cab
Post by: barranger on September 13, 2004, 04:30:53 pm

Any ideas Paige? ( Sorry if I'm pestering )

Title: Re:looking for plans to this cab
Post by: Witchboard on September 13, 2004, 08:34:37 pm

Or just replace the title with "Cabinet ID."  He loves those.

Title: Re:looking for plans to this cab
Post by: barranger on September 14, 2004, 01:51:27 am

Quote from: spystyle on September 13, 2004, 04:55:17 pm

Maybe you should add his name to the thread title (done by modifying the initial post) once he sees his name he'll be too curious not to look, it's very strategic!

At this point anythings worth a try to get this solved :)

Thanks a million,
Barranger

Title: Re:Looking for the demensions of this cab (Attn: Paige)
Post by: brained on September 14, 2004, 11:57:55 am

I'll post the measurements of my CP tonight, sorry been kinda busy.  8)

Title: Re:looking for plans to this cab
Post by: barranger on September 14, 2004, 11:58:13 am

Quote from: spystyle on September 13, 2004, 04:55:17 pm

I think it's a Dynamo cab, I have one I can measure, see this thread about it :

http://www.arcadecontrols.org/yabbse/index.php?board=1;action=display;threadid=24392

Actually looking at it again this morning, I think there different (location of coin mech, shape of the sides) but I do believe it's the same as brained's MKII machine.

Thanks again for everyone's help,
Barranger

Title: Re:Looking for the demensions of this cab (Attn: Paige)
Post by: barranger on September 15, 2004, 01:58:53 pm

Also brained,

     What monitor are you putting in yours?  I'm thinking about putting a 19" computer monitor but I'm thinking it may look a little small in there ( the horizontal cavity space is 25 1/2" ).

Thanks,
Barranger

Title: Re:Looking for the demensions of this cab (Attn: Paige)
Post by: barranger on September 15, 2004, 03:07:52 pm

Quote from: spystyle on September 15, 2004, 02:42:41 pm

At that size a 25" TV would  be cool...

The only problem with that is I may be able to pick up a 19" monitor cheap, but I'd have to pay full price for the TV.  Unless, of course, anyone knows of a good place near Toronto, Ontario to pick up even a used 25" TV for cheap

Thanks,
Barranger