Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: brained on September 06, 2004, 12:36:01 pm

Title: T-molding for sale .15 per foot
Post by: brained on September 06, 2004, 12:36:01 pm

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=13718&item=6117489031&rd=1

Hey, I think it's a nice price for it :D

Title: Re:T-molding for sale .15 per foot
Post by: exibar on September 06, 2004, 12:48:53 pm

Sure the price isn't bad, but they will screw you royally with shipping times.  They send their packages out via Media Mail and it takes forever to get to you.  Plus they'll not ship out your item when they tell you too.

Numerous people have filed fraud charges against them for them commiting mail fraud by shipping non-media stuff out via media mail.

  Look at their feedback, the neutral and negative, and even a lot of their positive all say that they take for ever shipping.  

  Look at this discussion on them too:  
http://www.arcadecontrols.org/yabbse/index.php?board=2;action=display;threadid=23928 (http://www.arcadecontrols.org/yabbse/index.php?board=2;action=display;threadid=23928)

  I would never EVER order from them again due to the lies that was told to me....

  Mike B

Title: Re:T-molding for sale .15 per foot
Post by: brained on September 06, 2004, 12:57:17 pm

Yeah I saw it, anyway I found that dreamarcades has them almost at the same price, Not from those guys. :S. It's a lot more safer :D

thanx exibar,

Title: Re:T-molding for sale .15 per foot
Post by: Dekelia on September 07, 2004, 11:28:31 am

I got some from them.  I took FOREVER to get it.  Close to 3 weeks.

I'm working on my first cab so I don't have a lot of experience and I screwed up the width of the t-molding I needed (I used 3/4" board and then to lamanate on it - should have usee 5/8" board" so my t-molding is too thin.   BUT...that being the case, the t-molding looks like it would still be to thin for 3/4" board.  It is barely 3/4" and a sliver would show on both sides of the t-molding..

I don't know what it is supposed to look like exactly, but I was hoping for it to be a hair OVER the edges to give just a hint of a lip.

I'm still trying to decide if I want to order other stuff from them.  They do have good prices on lots of HAPP stuff.

Title: Re:T-molding for sale .15 per foot
Post by: DreamArcades on September 29, 2004, 11:44:00 pm

I just want to make this point clear. The complaints in this thread are about www-kidsplaythings-cc not about Dream Arcades. At Dream Arcades we don

Title: Re:T-molding for sale .15 per foot
Post by: Bgnome on September 30, 2004, 12:09:00 am

dream arcades has great prices on arcade parts.  the only reason i didnt end up buying their control set is that their buttons are convex.   :-\

Title: Re:T-molding for sale .15 per foot
Post by: gap on September 30, 2004, 08:21:14 am

Hey DreamArcades,

Where's your website?  I clicked on the www link under your username, but get an error.

Entered "dreamarcades.com", same error.

Title: Re:T-molding for sale .15 per foot
Post by: nighthawk2099 on September 30, 2004, 09:11:53 am

Try this one

http://www.dreamarcades.com/ (http://www.dreamarcades.com/)

Title: Re:T-molding for sale .15 per foot
Post by: DreamArcades on October 01, 2004, 06:30:34 pm

Bgnome,

We added two sets with concave pushbuttons.  One set includes blue (with integrated switches), the other black pushbuttons (with external switches).
We've also, lower our shipping rates and added other accessories.

Gap,
I fix the link, it now reads, "http", not "htp". It should work not.
-Mike