Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: nullb0y on September 02, 2002, 09:21:00 pm

Title: nullpad I's buttons have arived
Post by: nullb0y on September 02, 2002, 09:21:00 pm

ok i just got these things when i came home so i am not shure about oe thing the ,micro switches have 3 prongs and im not shurre wjere to commect what... heh ill probally figure it out but any help would greatly be apreicated look for updated pics on the nullpad site soon

Title: Re:nullpad I's buttons have arived
Post by: JustMichael on September 02, 2002, 09:42:58 pm

The 3 prongs should be labeled something like "COM", "NO", "NC".  If you are using an I-PAC, you connect the ground to the COM and the NO to the input on the I-PAC.

Title: Re:nullpad I's buttons have arived
Post by: nullb0y on September 02, 2002, 09:44:44 pm

ok and what do i do for a joystoick hack? (they are labeled  as so)

Title: Re:nullpad I's buttons have arived
Post by: nullb0y on September 02, 2002, 09:55:58 pm

ok n/m i got it workin